from http://www.hypn.za.net/tf2_cvars.txt achievement_debug : 0 : , "sv", "cheat", "rep" : Turn on achievement debug msgs. achievement_status : cmd : : Shows status of all achievement addip : cmd : : Add an IP address to the ban list. adsp_alley_min : 122 : : adsp_courtyard_min : 126 : : adsp_debug : 0 : , "a" : adsp_door_height : 112 : : adsp_duct_min : 106 : : adsp_hall_min : 110 : : adsp_low_ceiling : 108 : : adsp_opencourtyard_min : 126 : : adsp_openspace_min : 130 : : adsp_openstreet_min : 118 : : adsp_openwall_min : 130 : : adsp_room_min : 102 : : adsp_street_min : 118 : : adsp_tunnel_min : 114 : : adsp_wall_height : 128 : : ai_auto_contact_solver : 1 : , "sv" : ai_block_damage : 0 : , "sv" : ai_clear_bad_links : cmd : : Clears bits set on nav links indicating link is unusable ai_debug_assault : 0 : , "sv" : ai_debug_avoidancebounds : 0 : , "sv" : ai_debug_directnavprobe : 0 : , "sv" : ai_debug_doors : 0 : , "sv" : ai_debug_dyninteractions : 0 : , "sv" : Debug the NPC dynamic interaction system. ai_debug_efficiency : 0 : , "sv" : ai_debug_enemies : 0 : , "sv" : ai_debug_expressions : 0 : , "sv" : Show random expression decisions for NPCs. ai_debug_follow : 0 : , "sv" : ai_debug_loners : 0 : , "sv" : ai_debug_looktargets : 0 : , "sv" : ai_debug_los : 0 : , "sv", "cheat" : NPC Line-Of-Sight debug mode. If 1, solid entities that block NPC LOC will be highlighted with white bounding boxes. If 2, it'l ai_debug_nav : 0 : , "sv" : ai_debug_node_connect : cmd : : Debug the attempted connection between two nodes ai_debug_ragdoll_magnets : 0 : , "sv" : ai_debug_shoot_positions : 0 : , "sv", "cheat", "rep" : ai_debug_speech : 0 : , "sv" : ai_debug_squads : 0 : , "sv" : ai_debug_think_ticks : 0 : , "sv" : ai_debugscriptconditions : 0 : , "sv" : ai_default_efficient : 0 : , "sv" : ai_disable : cmd : : Bi-passes all AI logic routines and puts all NPCs into their idle animations. Can be used to get NPCs out of your way and to t ai_drawbattlelines : 0 : , "sv", "cheat" : ai_drop_hint : cmd : : Drop an ai_hint at the player's current eye position. ai_dump_hints : cmd : : ai_efficiency_override : 0 : , "sv" : ai_enable_fear_behavior : 1 : , "sv" : ai_expression_frametime : 0 : , "sv" : Maximum frametime to still play background expressions. ai_expression_optimization : 0 : , "sv" : Disable npc background expressions when you can't see them. ai_fear_player_dist : 720 : , "sv" : ai_find_lateral_cover : 1 : , "sv" : ai_find_lateral_los : 1 : , "sv" : ai_follow_use_points : 1 : , "sv" : ai_follow_use_points_when_moving : 1 : , "sv" : ai_force_serverside_ragdoll : 0 : , "sv" : ai_frametime_limit : 50 : , "sv" : frametime limit for min efficiency AIE_NORMAL (in sec's). ai_hull : cmd : : Controls which connections are shown when ai_show_hull or ai_show_connect commands are used Arguments: NPC name or classname, ai_inhibit_spawners : 0 : , "sv", "cheat" : ai_lead_time : 0 : , "sv" : ai_LOS_mode : 0 : , "sv", "rep" : ai_moveprobe_debug : 0 : , "sv" : ai_moveprobe_jump_debug : 0 : , "sv" : ai_moveprobe_usetracelist : 0 : , "sv" : ai_navigator_generate_spikes : 0 : , "sv" : ai_navigator_generate_spikes_strength : 8 : , "sv" : ai_next_hull : cmd : : Cycles through the various hull sizes. Currently selected hull size is written to the screen. Controls which connections are ai_no_local_paths : 0 : , "sv" : ai_no_node_cache : 0 : , "sv" : ai_no_select_box : 0 : , "sv" : ai_no_steer : 0 : , "sv" : ai_no_talk_delay : 0 : , "sv" : ai_nodes : cmd : : Toggles node display. First call displays the nodes for the given network as green objects. Second call displays the nodes a ai_norebuildgraph : 0 : , "sv" : ai_path_adjust_speed_on_immediate_turns : 1 : , "sv" : ai_path_insert_pause_at_est_end : 1 : , "sv" : ai_path_insert_pause_at_obstruction : 1 : , "sv" : ai_post_frame_navigation : 0 : , "sv" : ai_radial_max_link_dist : 512 : , "sv" : ai_reaction_delay_alert : 0 : , "sv" : ai_reaction_delay_idle : 0 : , "sv" : ai_rebalance_thinks : 1 : , "sv" : ai_report_task_timings_on_limit : 0 : , "a", "sv" : ai_resume : cmd : : If NPC is stepping through tasks (see ai_step ) will resume normal processing. ai_sequence_debug : 0 : , "sv" : ai_set_move_height_epsilon : cmd : : Set how high AI bumps up ground walkers when checking steps ai_setupbones_debug : 0 : , "sv" : Shows that bones that are setup every think ai_shot_bias : 1 : , "sv" : ai_shot_bias_max : 1 : , "sv", "rep" : ai_shot_bias_min : -1 : , "sv", "rep" : ai_shot_stats : 0 : , "sv" : ai_shot_stats_term : 1000 : , "sv" : ai_show_connect : cmd : : Displays the allowed connections between each node for the currently selected hull type. Hulls are color code as follows: Gre ai_show_connect_fly : cmd : : Displays the allowed connections between each node for the currently selected hull type. Hulls are color code as follows: Gre ai_show_connect_jump : cmd : : Displays the allowed connections between each node for the currently selected hull type. Hulls are color code as follows: Gre ai_show_graph_connect : cmd : : Toggles graph connection display for the node that the player is looking at. Nodes that are connected to the selected node by ai_show_grid : cmd : : Draw a grid on the floor where looking. ai_show_hints : cmd : : Displays all hints as small boxes Blue - hint is available for use Red - hint is currently being used by an NPC Orange - ai_show_hull : cmd : : Displays the allowed hulls between each node for the currently selected hull type. Hulls are color code as follows: Green - ai_show_hull_attacks : 0 : , "sv" : ai_show_node : cmd : : Highlight the specified node ai_show_think_tolerance : 0 : , "sv" : ai_show_visibility : cmd : : Toggles visibility display for the node that the player is looking at. Nodes that are visible from the selected node will be d ai_simulate_task_overtime : 0 : , "sv" : ai_spread_cone_focus_time : 0 : , "sv" : ai_spread_defocused_cone_multiplier : 3 : , "sv" : ai_spread_pattern_focus_time : 0 : , "sv" : ai_step : cmd : : NPCs will freeze after completing their current task. To complete the next task, use 'ai_step' again. To resume processing no ai_strong_optimizations : 0 : , "sv" : ai_strong_optimizations_no_checkstand : 0 : , "sv" : ai_task_pre_script : 0 : , "sv" : ai_test_los : cmd : : Test AI LOS from the player's POV ai_test_moveprobe_ignoresmall : 0 : , "sv" : ai_think_limit_label : 0 : , "a", "sv" : ai_use_clipped_paths : 1 : , "sv" : ai_use_efficiency : 1 : , "sv" : ai_use_frame_think_limits : 1 : , "sv" : ai_use_think_optimizations : 1 : , "sv" : ai_use_visibility_cache : 1 : , "sv" : ai_vehicle_avoidance : 1 : , "sv", "cheat" : ainet_generate_report : cmd : : Generate a report to the console. ainet_generate_report_only : cmd : : Generate a report to the console. air_density : cmd : : Changes the density of air for drag computations. alias : cmd : : Alias a command. ammo_max : 5000 : , "sv", "rep" : anim_3wayblend : 1 : , "sv", "rep" : Toggle the 3-way animation blending code. anim_showmainactivity : 0 : , "cheat", "cl" : Show the idle, walk, run, and/or sprint activities. askconnect_accept : cmd : : Accept a redirect request by the server. async_allow_held_files : 1 : : Allow AsyncBegin/EndRead() async_mode : 0 : : Set the async filesystem mode (0 = async, 1 = synchronous) async_resume : cmd : : async_serialize : 0 : : Force async reads to serialize for profiling async_simulate_delay : 0 : : Simulate a delay of up to a set msec per file operation async_suspend : cmd : : audit_save_in_memory : cmd : : Audit the memory usage and files in the save-to-memory system autoaim_max_deflect : 0 : , "sv" : autoaim_max_dist : 2160 : , "sv" : autosave : cmd : : Autosave autosavedangerous : cmd : : AutoSaveDangerous autosavedangerousissafe : cmd : : award_achievement : cmd : : Award an achievement by ID +alt1 +alt2 +attack +attack2 banid : cmd : : Add a user ID to the ban list. banip : cmd : : Add an IP address to the ban list. bench_end : cmd : : Ends gathering of info. bench_showstatsdialog : cmd : : Shows a dialog displaying the most recent benchmark results. bench_start : cmd : : Starts gathering of info. Arguments: filename to write results into bench_upload : cmd : : Uploads most recent benchmark stats to the Valve servers. benchframe : cmd : : Takes a snapshot of a particular frame in a time demo. bind : cmd : : Bind a key. binds_per_command : 1 : , "cl" : BindToggle : cmd : : Performs a bind 'increment var 0 1 1' blink_duration : 0 : , "cl" : How many seconds an eye blink will last. bloodspray : cmd : : blood bot : cmd : : Add a bot. bot_changeclass : 0 : , "sv" : Force all bots to change to the specified class. bot_changeteams : cmd : : Make all bots change teams bot_command : cmd : : . Sends specified command on behalf of specified bot bot_defend : 0 : , "sv" : Set to a team number, and that team will all keep their combat shields raised. bot_dontmove : 0 : , "sv", "cheat" : bot_flipout : 0 : , "sv" : When on, all bots fire their guns. bot_forceattack2 : 0 : , "sv" : When firing, use attack2. bot_forceattackon : 1 : , "sv" : When firing, don't tap fire, hold it down. bot_forcefireweapon : 0 : , "sv" : Force bots with the specified weapon to fire. bot_kill : cmd : : . Kills bot. bot_mimic : 0 : , "sv" : Bot uses usercmd of player by index. bot_mimic_yaw_offset : 180 : , "sv" : Offsets the bot yaw. bot_randomnames : 0 : , "sv", "cheat" : bot_refill : cmd : : Refill all bot ammo counts bot_saveme : 0 : , "sv", "cheat" : bot_selectweaponslot : -1 : , "sv", "cheat" : set to weapon slot that bot should switch to. bot_teleport : cmd : : Teleport the specified bot to the specified position & angles. Format: bot_teleport cl_find_ent_index : cmd : : Display data for clientside entity matching specified index. Format: cl_find_ent_index cl_flag_return_height : 82 : , "sv", "cheat" : cl_flag_return_size : 20 : , "cheat", "cl" : cl_flushentitypacket : 0 : , "cheat" : For debugging. Force the engine to flush an entity packet. cl_forcepreload : 0 : , "a" : Whether we should force preloading. cl_forwardspeed : 450 : , "cheat", "cl" : cl_fullupdate : cmd : : Forces the server to send a full update packet cl_gunlowerangle : 90 : , "cl" : cl_gunlowerspeed : 2 : , "cl" : cl_idealpitchscale : 0 : , "a", "cl" : cl_ignorepackets : 0 : , "cheat" : Force client to ignore packets (for debugging). cl_interp_all : 0 : , "cl" : Disable interpolation list optimizations. cl_interp_npcs : 0 : , "user", "cl" : Interpolate NPC positions starting this many seconds in past (or cl_interp, if greater) cl_interp_ratio : 2 : , "user", "cl" : Sets the interpolation amount (final amount is cl_interp_ratio / cl_updaterate). cl_interp_threadmodeticks : 0 : , "cl" : Additional interpolation ticks to use when interpolating with threaded engine mode set. cl_interpolate : 1 : , "user", "cl" : Interpolate entities on the client. cl_jiggle_bone_debug : 0 : , "cheat", "cl" : Display physics-based 'jiggle bone' debugging information cl_jiggle_bone_debug_pitch_constraints : 0 : , "cheat", "cl" : Display physics-based 'jiggle bone' debugging information cl_jiggle_bone_debug_yaw_constraints : 0 : , "cheat", "cl" : Display physics-based 'jiggle bone' debugging information cl_lagcomp_errorcheck : 0 : , "cl" : Player index of other player to check for position errors. cl_lagcompensation : 1 : , "user", "cl" : Perform server side lag compensation of weapon firing events. cl_language : 0 : , "user" : Language (from HKCU\Software\Valve\Steam\Language) cl_leveloverview : 0 : , "cheat", "cl" : cl_leveloverviewmarker : 0 : , "cheat", "cl" : cl_localnetworkbackdoor : 1 : : Enable network optimizations for single player games. cl_logofile : 0 : , "a" : Spraypoint logo decal. cl_maxrenderable_dist : 3000 : , "cheat", "cl" : Max distance from the camera at which things will be rendered cl_mouseenable : 1 : , "cl" : cl_mouselook : 1 : , "a", "cl" : Set to 1 to use mouse for look, 0 for keyboard look. Cannot be set while connected to a server. cl_muzzleflash_dlight_1st : 1 : , "cl" : cl_obj_fake_alert : 0 : , "cl" : cl_obj_test_building_damage : -1 : , "cheat", "cl" : debug building damage cl_observercrosshair : 1 : , "a", "cl" : cl_overdraw_test : 0 : , "cheat", "numeric", "cl" : cl_panelanimation : cmd : : Shows panel animation variables: . cl_particle_batch_mode : 1 : , "cl" : cl_particle_max_count : 0 : , "cl" : cl_particleeffect_aabb_buffer : 2 : , "cheat", "cl" : Add this amount to a particle effect's bbox in the leaf system so if it's growing slowly, it won't have to be reinserted as oft cl_particles_dump_effects : cmd : : cl_particles_show_bbox : 0 : , "cheat", "cl" : cl_pclass : 0 : , "cheat", "cl" : Dump entity by prediction classname. cl_pdump : -1 : , "cheat", "cl" : Dump info about this entity to screen. cl_phys_debug_active : cmd : : Dump debug info for the active objects cl_phys_debug_all : cmd : : Dump debug info for all vphysics objects cl_phys_props_enable : 1 : , "cl" : Disable clientside physics props (must be set before loading a level). cl_phys_props_max : 300 : , "cl" : Maximum clientside physic props cl_phys_props_respawndist : 1500 : , "cl" : Minimum distance from the player that a clientside prop must be before it's allowed to respawn. cl_phys_props_respawnrate : 60 : , "cl" : Time, in seconds, between clientside prop respawns. cl_phys_timescale : 1 : , "cheat", "cl" : Sets the scale of time for client-side physics (ragdolls) cl_pitchdown : 89 : , "cheat", "cl" : cl_pitchspeed : 225 : , "cl" : cl_pitchup : 89 : , "cheat", "cl" : cl_playback_screenshots : 0 : : Allows the client to playback screenshot and jpeg commands in demos. cl_playersparyenable : 1 : , "cl" : Enable/Disable player sprays. cl_precacheinfo : cmd : : Show precache info (client). cl_pred_optimize : 2 : , "cl" : Optimize for not copying data if didn't receive a network update (1), and also for not repredicting if there were no errors (2) cl_pred_track : cmd : : : Track changes to entity index entindex, for field fieldname. cl_predict : 1 : , "user", "cl" : Perform client side prediction. cl_predictionlist : 0 : , "cheat", "cl" : Show which entities are predicting cl_predictweapons : 1 : , "user", "cl" : Perform client side prediction of weapon effects. cl_ragdoll_collide : 0 : , "cl" : cl_ragdoll_fade_time : 15 : , "cl" : cl_ragdoll_forcefade : 0 : , "cl" : cl_ragdoll_physics_enable : 1 : , "cl" : Enable/disable ragdoll physics. cl_ragdoll_pronecheck_distance : 64 : , "sv", "cl" : cl_removedecals : cmd : : Remove the decals from the entity under the crosshair. cl_report_collide : 0 : , "cl" : cl_resend : 6 : : Delay in seconds before the client will resend the 'connect' attempt cl_rumblescale : 1 : , "a", "cl" : Scale sensitivity of rumble effects (0 to 1.0) cl_scalecrosshair : 1 : , "a", "cl" : cl_screenshotname : 0 : : Custom Screenshot name cl_SetupAllBones : 0 : , "cl" : cl_shadowtextureoverlaysize : 256 : , "cheat", "cl" : cl_show_splashes : 1 : , "cl" : cl_ShowBoneSetupEnts : 0 : , "cl" : Show which entities are having their bones setup each frame. cl_showdemooverlay : 0 : : How often to flash demo recording/playback overlay (0 - disable overlay, -1 - show always) cl_showents : cmd : : Dump entity list to console. cl_showerror : 0 : , "cheat", "cl" : Show prediction errors, 2 for above plus detailed field deltas. cl_showevents : 0 : , "cheat" : Print event firing info in the console cl_showfps : 0 : , "cl" : Draw fps meter at top of screen (1 = fps, 2 = smooth fps) cl_showhelp : 1 : , "a", "user", "cl" : Set to 0 to not show on-screen help cl_showpausedimage : 1 : , "cl" : Show the 'Paused' image when game is paused. cl_showpluginmessages : 1 : , "a" : Allow plugins to display messages to you cl_showpos : 0 : , "cl" : Draw current position at top of screen cl_ShowSunVectors : 0 : , "cl" : cl_showtextmsg : 1 : , "cl" : Enable/disable text messages printing on the screen. cl_sidespeed : 450 : , "cheat", "cl" : cl_smooth : 1 : , "cl" : Smooth view/eye origin after prediction errors cl_smoothtime : 0 : , "cl" : Smooth client's view after prediction error over this many seconds cl_soundemitter_flush : cmd : : Flushes the sounds.txt system (client only) cl_soundfile : 0 : , "a" : Jingle sound file. cl_soundscape_flush : cmd : : Flushes the client side soundscapes cl_soundscape_printdebuginfo : cmd : : print soundscapes cl_spec_mode : 1 : , "a", "user", "server_can_execute", "cl" : spectator mode cl_sporeclipdistance : 512 : , "cheat", "cl" : cl_sun_decay_rate : 0 : , "cheat", "cl" : cl_team : 0 : , "a", "user", "cl" : Default team when joining a game cl_threaded_bone_setup : 0 : , "cl" : Enable parallel processing of C_BaseAnimating::SetupBones() cl_threaded_client_leaf_system : 0 : , "cl" : cl_timeout : 30 : , "a" : After this many seconds without receiving a packet from the server, the client will disconnect itself cl_updaterate : 20 : , "a", "user" : Number of packets per second of updates you are requesting from the server cl_upspeed : 320 : , "cheat", "cl" : cl_view : cmd : : Set the view entity index. cl_winddir : 0 : , "cheat", "cl" : Weather effects wind direction angle cl_windspeed : 0 : , "cheat", "cl" : Weather effects wind speed scalar cl_wpn_sway_interp : 0 : , "cl" : cl_wpn_sway_scale : 5 : , "cl" : cl_yawspeed : 210 : , "cl" : clear : cmd : : Clear all console output. clear_debug_overlays : cmd : : clears debug overlays clientport : 27005 : : Host game client port closecaption : 0 : , "a", "user" : Enable close captioning. cmd : cmd : : Forward command to server. collision_shake_amp : 0 : , "sv" : collision_shake_freq : 0 : , "sv" : collision_shake_time : 0 : , "sv" : collision_test : cmd : : Tests collision system colorcorrectionui : cmd : : Show/hide the color correction tools UI. commentary : 0 : , "a", "sv" : Desired commentary mode state. commentary_available : 0 : , "sv" : Automatically set by the game when a commentary file is available for the current map. commentary_cvarsnotchanging : cmd : : commentary_finishnode : cmd : : commentary_firstrun : 0 : , "a", "cl" : commentary_testfirstrun : cmd : : con_drawnotify : 1 : : Disables drawing of notification area (for taking screenshots). con_enable : 1 : , "a" : Allows the console to be activated. con_filter_enable : 0 : : Filters console output based on the setting of con_filter_text. 1 filters completely, 2 displays filtered text brighter than ot con_filter_text : 0 : : Text with which to filter console spew. Set con_filter_enable 1 or 2 to activate. con_filter_text_out : 0 : : Text with which to filter OUT of console spew. Set con_filter_enable 1 or 2 to activate. con_logfile : 0 : : Console output gets written to this file con_notifytime : 8 : : How long to display recent console text to the upper part of the game window con_nprint_bgalpha : 50 : : Con_NPrint background alpha. con_nprint_bgborder : 5 : : Con_NPrint border size. con_timestamp : 0 : : Prefix console.log entries with timestamps con_trace : 0 : : Print console text to low level printout. condump : cmd : : dump the text currently in the console to condumpXX.log connect : cmd : : Connect to specified server. contimes : 8 : : Number of console lines to overlay for debugging. coop : 0 : , "nf" : Cooperative play. crash : cmd : : Crash the client. Optional parameter -- type of crash: 0: read from NULL 1: write to NULL 2: DmCrashDump() (xbox360 only) create_flashlight : cmd : : CreateHairball : cmd : : creditsdone : cmd : : crosshair : 1 : , "a", "cl" : cvarlist : cmd : : Show the list of convars/concommands. datacachesize : 32 : : Size in MB. dbghist_addline : cmd : : Add a line to the debug history. Format: dbghist_dump : cmd : : Dump the debug history to the console. Format: Categories: 0: Entity I/O 1: AI Decisions 2: Sc deathmatch : 1 : , "nf" : Running a deathmatch server. debug_materialmodifycontrol : 0 : , "sv" : debug_materialmodifycontrol_client : 0 : , "cl" : debug_physimpact : 0 : , "sv" : debug_touchlinks : 0 : , "sv" : Spew touch link activity debugsystemui : cmd : : Show/hide the debug system UI. decalfrequency : 10 : , "sv", "nf" : default_fov : 75 : , "cheat", "cl" : demo_debug : 0 : : Demo debug info. demo_fastforwardfinalspeed : 20 : : Go this fast when starting to hold FF button. demo_fastforwardramptime : 5 : : How many seconds it takes to get to full FF speed. demo_fastforwardstartspeed : 2 : : Go this fast when starting to hold FF button. demo_gototick : cmd : : Skips to a tick in demo. demo_interplimit : 256 : : How many units the camera has to move between samples before it's considered to have 'teleported' causing interpolation to rese demo_interpolateview : 1 : : Do view interpolation during dem playback. demo_pause : cmd : : Pauses demo playback. demo_pauseatservertick : 0 : : Pauses demo playback at server tick demo_quitafterplayback : 0 : : Quits game after demo playback. demo_recordcommands : 1 : , "cheat" : Record commands typed at console into .dem files. demo_resume : cmd : : Resumes demo playback. demo_timescale : cmd : : Sets demo replay speed. demo_togglepause : cmd : : Toggles demo playback. demolist : cmd : : Print demo sequence list. demos : cmd : : Demo demo file sequence. demoui : cmd : : Show/hide the demo player UI. demoui2 : cmd : : Show/hide the advanced demo player UI (demoui2). developer : 0 : : Set developer message level devshots_nextmap : cmd : : Used by the devshots system to go to the next map in the devshots maplist. devshots_screenshot : cmd : : Used by the -makedevshots system to take a screenshot. For taking your own screenshots, use the 'screenshot' command instead. differences : cmd : : Show all convars which are not at their default values. disconnect : cmd : : Disconnect game from server. disp_dynamic : 0 : : dispcoll_drawplane : 0 : , "sv" : displaysoundlist : 0 : , "sv" : dlight_debug : cmd : : Creates a dlight in front of the player drawcross : cmd : : Draws a cross at the given location Arguments: x y z drawline : cmd : : Draws line between two 3D Points. Green if no collision Red is collides with something Arguments: x1 y1 z1 x2 y2 z2 dropitem : cmd : : Drop the flag. dsp_automatic : 0 : , "demo" : dsp_db_min : 80 : , "demo" : dsp_db_mixdrop : 0 : , "demo" : dsp_dist_max : 1440 : , "a", "cheat", "demo" : dsp_dist_min : 0 : , "a", "cheat", "demo" : dsp_enhance_stereo : 0 : , "a" : dsp_facingaway : 0 : , "demo" : dsp_mix_max : 0 : , "demo" : dsp_mix_min : 0 : , "demo" : dsp_off : 0 : , "cheat" : dsp_player : 0 : , "demo", "server_can_execute" : dsp_reload : cmd : : dsp_room : 1 : , "demo" : dsp_slow_cpu : 0 : , "a", "demo" : dsp_spatial : 40 : , "demo" : dsp_speaker : 50 : , "demo" : dsp_vol_2ch : 1 : , "demo" : dsp_vol_4ch : 0 : , "demo" : dsp_vol_5ch : 0 : , "demo" : dsp_volume : 1 : , "a", "demo" : dsp_water : 14 : , "demo" : dt_ShowPartialChangeEnts : 0 : : (SP only) - show entities that were copied using small optimized lists (FL_EDICT_PARTIAL_CHANGE). dt_UsePartialChangeEnts : 1 : : (SP only) - enable FL_EDICT_PARTIAL_CHANGE optimization. dti_flush : cmd : : Write out the datatable instrumentation files (you must run with -dti for this to work). dtwarning : 0 : : Print data table warnings? dtwatchclass : 0 : : Watch all fields encoded with this table. dtwatchent : -1 : : Watch this entities data table encoding. dtwatchvar : 0 : : Watch the named variable. dump_entity_sizes : cmd : : Print sizeof(entclass) dump_globals : cmd : : Dump all global entities/states dump_panels : cmd : : Dump Panel Tree dump_x360_cfg : cmd : : Dump X360 config files to disk dump_x360_saves : cmd : : Dump X360 save games to disk dumpentityfactories : cmd : : Lists all entity factory names. dumpeventqueue : cmd : : Dump the contents of the Entity I/O event queue to the console. dumpgamestringtable : cmd : : Dump the contents of the game string table to the console. dumpsavedir : cmd : : List the contents of the save directory in memory dumpstringtables : cmd : : Print string tables to console. echo : cmd : : Echo text to console. editdemo : cmd : : Edit a recorded demo file (.dem ). editor_toggle : cmd : : Disables the simulation and returns focus to the editor endmovie : cmd : : Stop recording movie frames. english : 1 : , "user", "cl" : If set to 1, running the english language set of assets. ent_absbox : cmd : : Displays the total bounding box for the given entity(s) in green. Some entites will also display entity specific overlays. Ar ent_attachments : cmd : : Displays the attachment points on an entity. Arguments: {entity_name} / {class_name} / no argument picks what player is loo ent_autoaim : cmd : : Displays the entity's autoaim radius. Arguments: {entity_name} / {class_name} / no argument picks what player is looking at ent_bbox : cmd : : Displays the movement bounding box for the given entity(ies) in orange. Some entites will also display entity specific overlay ent_cancelpendingentfires : cmd : : Cancels all ent_fire created outputs that are currently waiting for their delay to expire. ent_create : cmd : : Creates an entity of the given type where the player is looking. ent_debugkeys : 0 : , "sv" : ent_dump : cmd : : Usage: ent_dump ent_fire : cmd : : Usage: ent_fire [action] [value] [delay] ent_info : cmd : : Usage: ent_info ent_keyvalue : cmd : : Applies the comma delimited key=value pairs to the entity with the given Hammer ID. Format: ent_keyvalue = ent_text : cmd : : Displays text debugging information about the given entity(ies) on top of the entity (See Overlay Text) Arguments: {entity_ ent_viewoffset : cmd : : Displays the eye position for the given entity(ies) in red. Arguments: {entity_name} / {class_name} / no argument picks wha envmap : cmd : : escape : cmd : : Escape key pressed. exec : cmd : : Execute script file. exit : cmd : : Exit the engine. explode : cmd : : Kills the player with explosive damage explodevector : cmd : : Kills a player applying an explosive force. Usage: explodevector fadein : cmd : : fadein {time r g b}: Fades the screen in from black or from the specified color over the given number of seconds. fadeout : cmd : : fadeout {time r g b}: Fades the screen to black or to the specified color over the given number of seconds. fast_fogvolume : 0 : : filesystem_buffer_size : 0 : : Size of per file buffers. 0 for none find : cmd : : Find concommands with the specified string in their name/help text. find_ent : cmd : : Find and list all entities with classnames or targetnames that contain the specified substring. Format: find_ent find_ent_index : cmd : : Display data for entity matching specified index. Format: find_ent_index findflags : cmd : : Find concommands by flags. fire_absorbrate : 3 : , "sv" : fire_dmgbase : 1 : , "sv" : fire_dmginterval : 1 : , "sv" : fire_dmgscale : 0 : , "sv" : fire_extabsorb : 5 : , "sv" : fire_extscale : 12 : , "sv" : fire_growthrate : 1 : , "sv" : fire_heatscale : 1 : , "sv" : fire_incomingheatscale : 0 : , "sv" : fire_maxabsorb : 50 : , "sv" : firetarget : cmd : : firstperson : cmd : : Switch to firstperson camera. fish_debug : 0 : , "cheat", "cl" : Show debug info for fish fish_dormant : 0 : , "sv", "cheat", "rep" : Turns off interactive fish behavior. Fish become immobile and unresponsive. flex_expression : 0 : , "sv" : flex_looktime : 5 : , "sv" : flex_maxawaytime : 1 : , "sv" : flex_maxplayertime : 7 : , "sv" : flex_minawaytime : 0 : , "sv" : flex_minplayertime : 5 : , "sv" : flex_rules : 1 : , "cl" : Allow flex animation rules to run. flex_smooth : 1 : , "cl" : Applies smoothing/decay curve to flex animation controller changes. flex_talk : 0 : , "sv" : flush : cmd : : Flush unlocked cache memory. flush_locked : cmd : : Flush unlocked and locked cache memory. fog_color : -1 : , "cheat", "cl" : fog_colorskybox : -1 : , "cheat", "cl" : fog_enable : 1 : , "cheat", "cl" : fog_enable_water_fog : 1 : , "cheat" : fog_enableskybox : 1 : , "cheat", "cl" : fog_end : -1 : , "cheat", "cl" : fog_endskybox : -1 : , "cheat", "cl" : fog_maxdensity : -1 : , "cheat", "cl" : fog_maxdensityskybox : -1 : , "cheat", "cl" : fog_override : 0 : , "cheat", "cl" : fog_start : -1 : , "cheat", "cl" : fog_startskybox : -1 : , "cheat", "cl" : force_centerview : cmd : : fov : cmd : : Change players FOV fps_max : 300 : : Frame rate limiter free_pass_peek_debug : 0 : , "sv" : fs_convert : 1 : : Allow Xbox 360 files to be generated at runtime fs_monitor_read_from_pack : 0 : : 0:Off, 1:Any, 2:Sync only fs_printopenfiles : cmd : : Show all files currently opened by the engine. fs_report_sync_opens : 0 : : 0:Off, 1:Always, 2:Not during load fs_warning_level : cmd : : Set the filesystem warning level. fs_warning_mode : 0 : : 0:Off, 1:Warn main thread, 2:Warn other threads func_break_max_pieces : 15 : , "a", "sv", "rep" : func_break_reduction_factor : 0 : , "sv" : func_breakdmg_bullet : 0 : , "sv" : func_breakdmg_club : 1 : , "sv" : func_breakdmg_explosive : 1 : , "sv" : g15_dumpplayer : cmd : : Spew player data. g15_reload : cmd : : Reloads the Logitech G-15 Keyboard configs. g15_update_msec : 250 : , "a", "cl" : Logitech G-15 Keyboard update interval. g_debug_angularsensor : 0 : , "sv", "cheat" : g_debug_constraint_sounds : 0 : , "sv", "cheat" : Enable debug printing about constraint sounds. g_debug_doors : 0 : , "sv" : g_debug_npc_vehicle_roles : 0 : , "sv" : g_debug_ragdoll_removal : 0 : , "sv", "cheat", "rep" : g_debug_ragdoll_visualize : 0 : , "cheat", "cl" : g_debug_trackpather : 0 : , "sv", "cheat" : g_debug_transitions : 0 : , "sv" : Set to 1 and restart the map to be warned if the map has no trigger_transition volumes. Set to 2 to see a dump of all entities g_debug_vehiclebase : 0 : , "sv", "cheat" : g_debug_vehicledriver : 0 : , "sv", "cheat" : g_debug_vehicleexit : 0 : , "sv", "cheat" : g_debug_vehiclesound : 0 : , "sv", "cheat" : g_Language : 0 : , "sv", "rep" : g_ragdoll_fadespeed : 600 : , "cl" : g_ragdoll_important_maxcount : 2 : , "sv", "rep" : g_ragdoll_lvfadespeed : 100 : , "cl" : g_ragdoll_maxcount : 8 : , "sv", "rep" : gamemenucommand : cmd : : Issue game menu command. gameui_activate : cmd : : Shows the game UI gameui_allowescape : cmd : : Escape key allowed to hide game UI gameui_allowescapetoshow : cmd : : Escape key allowed to show game UI gameui_hide : cmd : : Hides the game UI gameui_hide_dialog : cmd : : asdf gameui_preventescape : cmd : : Escape key doesn't hide game UI gameui_preventescapetoshow : cmd : : Escape key doesn't show game UI gameui_show_dialog : cmd : : Show an arbitrary Dialog. gameui_xbox : 0 : : getpos : cmd : : dump position and angles to the console give : cmd : : Give item to player. Arguments: givecurrentammo : cmd : : Give a supply of ammo for current weapon.. gl_clear : 0 : , "cl" : gl_clear_randomcolor : 0 : , "cheat", "cl" : Clear the back buffer to random colors every frame. Helps spot open seams in geometry. global_set : cmd : : global_set : Sets the state of the given env_global (0 = OFF, 1 = ON, 2 = DEAD). god : cmd : : Toggle. Player becomes invulnerable. groundlist : cmd : : Display ground entity list hammer_update_entity : cmd : : Updates the entity's position/angles when in edit mode hammer_update_safe_entities : cmd : : Updates entities in the map that can safely be updated (don't have parents or are affected by constraints). Also excludes entit heartbeat : cmd : : Force heartbeat of master servers help : cmd : : Find help about a convar/concommand. hideconsole : cmd : : Hide the console. hidehud : 0 : , "cheat", "cl" : hidepanel : cmd : : Hides a viewport panel hidestatpanel : cmd : : hl2_episodic : 0 : , "sv", "rep" : host_flush_threshold : 20 : : Memory threshold below which the host should flush caches between server instances host_framerate : 0 : : Set to lock per-frame time elapse. host_limitlocal : 0 : : Apply cl_cmdrate and cl_updaterate to loopback connection host_map : 0 : : Current map name. host_profile : 0 : : host_runofftime : cmd : : Run off some time without rendering/updating sounds host_showcachemiss : 0 : : Print a debug message when the client or server cache is missed. host_ShowIPCCallCount : 0 : : Print # of IPC calls this number of times per second. If set to -1, the # of IPC calls is shown every frame. host_sleep : 0 : , "cheat" : Force the host to sleep a certain number of milliseconds each frame. host_speeds : 0 : : Show general system running times. host_thread_mode : 0 : : Run the host in threaded mode, (0 == off, 1 == if multicore, 2 == force) host_timescale : 1 : , "rep" : Prescale the clock by this amount. host_writeconfig : cmd : : Store current settings to config.cfg (or specified .cfg file). hostip : -1062731264.000 : : Host game server ip hostname : 0 : : Hostname for server. hostport : 27015 : : Host game server port hud_autoaim_method : 1 : , "cl" : hud_autoaim_scale_icon : 0 : , "cl" : hud_autoreloadscript : 0 : , "cl" : Automatically reloads the animation script each time one is ran hud_centerid : 1 : , "cl" : hud_classautokill : 1 : , "a", "user", "cl" : Automatically kill player after choosing a new playerclass. hud_deathnotice_time : 6 : , "cl" : hud_draw_active_reticle : 0 : , "cl" : hud_draw_fixed_reticle : 0 : , "a", "cl" : hud_drawhistory_time : 5 : , "cl" : hud_fastswitch : 1 : , "a", "cl" : hud_magnetism : 0 : , "cl" : hud_reloadscheme : cmd : : Reloads hud layout and animation scripts. hud_reticle_alpha_speed : 700 : , "cl" : hud_reticle_maxalpha : 255 : , "cl" : hud_reticle_minalpha : 125 : , "cl" : hud_reticle_scale : 1 : , "cl" : hud_saytext_time : 12 : , "cl" : hud_showtargetid : 1 : , "cl" : hurtme : cmd : : Hurts the player. Arguments: ifm_basecamera_camerastate : cmd : : Set camera state ifm_steadycam_2ddragconstant : 11 : , "a", "cl" : ifm_steadycam_2dspringconstant : 33 : , "a", "cl" : ifm_steadycam_armspeed : 0 : , "a", "cl" : ifm_steadycam_mousefactor : 1 : , "a", "cl" : ifm_steadycam_mousepower : 1 : , "a", "cl" : ifm_steadycam_noise : 0 : , "a", "rep", "cl" : ifm_steadycam_rotatedamp : 0 : , "a", "cl" : ifm_steadycam_rotaterate : 60 : , "a", "cl" : ifm_steadycam_sensitivity : 1 : , "a", "rep", "cl" : ifm_steadycam_zoomdamp : 0 : , "a", "cl" : ifm_steadycam_zoomspeed : 1 : , "a", "cl" : impulse : cmd : : incrementvar : cmd : : Increment specified convar value. invnext : cmd : : invprev : cmd : : ip : 0 : : Overrides IP for multihomed hosts join_class : cmd : : Send a joinclass command join_class : cmd : : Send a joinclass command join_team : cmd : : Send a jointeam command joy_accel_filter : 0 : , "cl" : joy_accelmax : 1 : , "a", "cl" : joy_accelscale : 0 : , "a", "cl" : joy_advanced : 0 : , "a", "cl" : joy_advaxisr : 0 : , "a", "cl" : joy_advaxisu : 0 : , "a", "cl" : joy_advaxisv : 0 : , "a", "cl" : joy_advaxisx : 0 : , "a", "cl" : joy_advaxisy : 0 : , "a", "cl" : joy_advaxisz : 0 : , "a", "cl" : joy_autoaimdampen : 0 : , "a", "cl" : How much to scale user stick input when the gun is pointing at a valid target. joy_autoaimdampenrange : 0 : , "a", "cl" : The stick range where autoaim dampening is applied. 0 = off joy_autosprint : 0 : , "cl" : Automatically sprint when moving with an analog joystick joy_axisbutton_threshold : 0 : , "a" : Analog axis range before a button press is registered. joy_diagonalpov : 0 : , "a", "cl" : POV manipulator operates on diagonal axes, too. joy_display_input : 0 : , "a", "cl" : joy_forwardsensitivity : -1 : , "a", "cl" : joy_forwardthreshold : 0 : , "a", "cl" : joy_inverty : 0 : , "a", "cl" : Whether to invert the Y axis of the joystick for looking. joy_inverty_default : 0 : , "cl" : joy_lowend : 1 : , "a", "cl" : joy_lowmap : 1 : , "a", "cl" : joy_movement_stick : 0 : , "a", "cl" : Which stick controls movement (0 is left stick) joy_movement_stick_default : 0 : , "cl" : joy_name : 0 : , "a", "cl" : joy_pegged : 0 : , "cl" : joy_pitchsensitivity : 1 : , "a", "cl" : joy_pitchsensitivity_default : -1 : , "cl" : joy_pitchthreshold : 0 : , "a", "cl" : joy_response_look : 0 : , "a", "cl" : 'Look' stick response mode: 0=Default, 1=Acceleration Promotion joy_response_move : 1 : , "a", "cl" : 'Movement' stick response mode: 0=Linear, 1=quadratic, 2=cubic, 3=quadratic extreme, 4=power function(i.e., pow(x,1/sensitivity joy_response_move_vehicle : 6 : , "cl" : joy_sidesensitivity : 1 : , "a", "cl" : joy_sidethreshold : 0 : , "a", "cl" : joy_vehicle_turn_lowend : 0 : , "cl" : joy_vehicle_turn_lowmap : 0 : , "cl" : joy_virtual_peg : 0 : , "cl" : joy_wingmanwarrior_centerhack : 0 : , "a" : Wingman warrior centering hack. joy_wingmanwarrior_turnhack : 0 : , "a", "cl" : Wingman warrior hack related to turn axes. joy_xcontroller_cfg_loaded : 0 : , "a", "cl" : If 0, the 360controller.cfg file will be executed on startup & option changes. joy_xcontroller_found : 0 : : Automatically set to 1 if an xcontroller has been detected. joy_yawsensitivity : -1 : , "a", "cl" : joy_yawsensitivity_default : -1 : , "cl" : joy_yawthreshold : 0 : , "a", "cl" : joyadvancedupdate : cmd : : joystick : 0 : , "a", "cl" : jpeg : cmd : : Take a jpeg screenshot: jpeg . jpeg_quality : 90 : : jpeg screenshot quality. kdtree_test : cmd : : Tests spatial partition for entities queries. key_findbinding : cmd : : Find key bound to specified command string. key_listboundkeys : cmd : : List bound keys with bindings. key_updatelayout : cmd : : Updates game keyboard layout to current windows keyboard setting. kick : cmd : : Kick a player by name. kickid : cmd : : Kick a player by userid or uniqueid, with a message. kill : cmd : : Kills the player with generic damage killserver : cmd : : Shutdown the server. killvector : cmd : : Kills a player applying force. Usage: killvector lastinv : cmd : : light_crosshair : cmd : : Show texture color at crosshair lightcache_maxmiss : 2 : , "cheat" : lightprobe : cmd : : Samples the lighting environment. Creates a cubemap and a file indicating the local lighting in a subdirectory called 'material linefile : cmd : : Parses map leak data from .lin file listdeaths : cmd : : lists player deaths listdemo : cmd : : List demo file contents. listid : cmd : : Lists banned users. listip : cmd : : List IP addresses on the ban list. listmodels : cmd : : List loaded models. listRecentNPCSpeech : cmd : : Displays a list of the last 5 lines of speech from NPCs. load : cmd : : Load a saved game. loadcommentary : cmd : : lod_TransitionDist : 800 : , "cl" : log : cmd : : Enables logging to file, console, and udp < on | off >. logaddress_add : cmd : : Set address and port for remote host . logaddress_del : cmd : : Remove address and port for remote host . logaddress_delall : cmd : : Remove all udp addresses being logged to logaddress_list : cmd : : List all addresses currently being used by logaddress. lookspring : 0 : , "a", "cl" : lookstrafe : 0 : , "a", "cl" : lservercfgfile : 0 : , "sv" : m_customaccel : 0 : , "a", "cl" : Custom mouse acceleration (0 disable, 1 to enable, 2 enable with separate yaw/pitch rescale). Formula: mousesensitivity = ( raw m_customaccel_exponent : 1 : , "a", "cl" : Mouse move is raised to this power before being scaled by scale factor. m_customaccel_max : 0 : , "a", "cl" : Max mouse move scale factor, 0 for no limit m_customaccel_scale : 0 : , "a", "cl" : Custom mouse acceleration value. m_filter : 0 : , "a", "cl" : Mouse filtering (set this to 1 to average the mouse over 2 frames). m_forward : 1 : , "a", "cl" : Mouse forward factor. m_mouseaccel1 : 0 : , "a", "cl" : Windows mouse acceleration initial threshold (2x movement). m_mouseaccel2 : 0 : , "a", "cl" : Windows mouse acceleration secondary threshold (4x movement). m_mousespeed : 1 : , "a", "cl" : Windows mouse speed factor (range 1 to 20). m_pitch : 0 : , "a", "cl" : Mouse pitch factor. m_side : 0 : , "a", "cl" : Mouse side factor. m_yaw : 0 : , "a", "cl" : Mouse yaw factor. map : cmd : : Start playing on specified map. map_background : cmd : : Runs a map as the background to the main menu. map_commentary : cmd : : Start playing, with commentary, on a specified map. map_edit : cmd : : map_noareas : 0 : : Disable area to area connection testing. map_showspawnpoints : cmd : : Dev - test the spawn points, draws for 60 seconds mapcyclefile : 0 : , "sv" : maps : cmd : : Displays list of maps. mat_aaquality : 0 : : mat_accelerate_adjust_exposure_down : 3 : , "cheat" : mat_alphacoverage : 1 : : mat_antialias : 4 : : mat_autoexposure_max : 2 : , "cl" : mat_autoexposure_min : 0 : , "cl" : mat_bloom_scalefactor_scalar : 1 : , "cl" : mat_bloomamount_rate : 0 : , "cheat", "cl" : mat_bloomscale : 1 : , "cl" : mat_bufferprimitives : 1 : : mat_bumpbasis : 0 : , "cheat" : mat_bumpmap : 1 : : mat_camerarendertargetoverlaysize : 128 : , "cheat", "cl" : mat_clipz : 1 : , "cl" : mat_colcorrection_disableentities : 0 : : Disable map color-correction entities mat_colorcorrection : 1 : : mat_compressedtextures : 1 : : mat_configcurrent : cmd : : show the current video control panel config for the material system mat_crosshair : cmd : : Display the name of the material under the crosshair mat_crosshair_edit : cmd : : open the material under the crosshair in the editor defined by mat_crosshair_edit_editor mat_crosshair_explorer : cmd : : open the material under the crosshair in explorer and highlight the vmt file mat_crosshair_printmaterial : cmd : : print the material under the crosshair mat_crosshair_reloadmaterial : cmd : : reload the material under the crosshair mat_debug : cmd : : Activates debugging spew for a specific material. mat_debug_autoexposure : 0 : , "cheat", "cl" : mat_debug_bloom : 0 : , "cheat", "cl" : mat_debug_postprocessing_effects : 0 : , "cl" : 0 = off, 1 = show post-processing passes in quadrants of the screen, 2 = only apply post-processing to the centre of the screen mat_debug_process_halfscreen : 0 : , "cheat", "cl" : mat_debugalttab : 0 : , "cheat" : mat_debugdepth : 0 : : mat_debugdepthmode : 0 : : mat_debugdepthval : 128 : : mat_debugdepthvalmax : 256 : : mat_depthbias_decal : -262144 : , "cheat" : mat_depthbias_normal : 0 : , "cheat" : mat_depthbias_shadowmap : 0 : , "cheat" : mat_diffuse : 1 : : mat_disable_bloom : 0 : , "cl" : mat_disable_fancy_blending : 0 : : mat_disable_lightwarp : 0 : : mat_disable_ps_patch : 0 : : mat_disablehwmorph : 0 : : Disables HW morphing for particular mods mat_drawflat : 0 : , "cheat" : mat_drawTexture : 0 : , "cl" : Enable debug view texture mat_drawTextureScale : 1 : , "cl" : Debug view texture scale mat_drawTitleSafe : 0 : , "cl" : Enable title safe overlay mat_drawwater : 1 : , "cheat", "cl" : mat_dxlevel : 95 : : mat_dynamic_tonemapping : 1 : , "cheat" : mat_edit : cmd : : Bring up the material under the crosshair in the editor mat_envmapsize : 128 : : mat_envmaptgasize : 32 : : mat_excludetextures : 0 : : mat_exposure_center_region_x : 0 : , "cheat", "cl" : mat_exposure_center_region_x_flashlight : 0 : , "cheat", "cl" : mat_exposure_center_region_y : 0 : , "cheat", "cl" : mat_exposure_center_region_y_flashlight : 0 : , "cheat", "cl" : mat_fastnobump : 0 : , "cheat" : mat_fastspecular : 1 : : Enable/Disable specularity for visual testing. Will not reload materials and will not affect perf. mat_fillrate : 0 : , "cheat" : mat_filterlightmaps : 1 : : mat_filtertextures : 1 : : mat_force_bloom : 0 : , "cheat", "cl" : mat_force_ps_patch : 0 : : mat_force_tonemap_scale : 0 : , "cheat" : mat_forceaniso : 8 : : mat_forcedynamic : 0 : , "cheat" : mat_forcehardwaresync : 1 : : mat_forcemanagedtextureintohardware : 0 : : mat_frame_sync_enable : 1 : , "cheat" : mat_frame_sync_force_texture : 0 : , "cheat" : Force frame syncing to lock a managed texture. mat_framebuffercopyoverlaysize : 128 : , "cl" : mat_fullbright : 0 : , "cheat" : mat_hdr_enabled : cmd : : Report if HDR is enabled for debugging mat_hdr_level : 0 : : Set to 0 for no HDR, 1 for LDR+bloom on HDR maps, and 2 for full HDR on HDR maps. mat_hdr_manual_tonemap_rate : 1 : : mat_hdr_tonemapscale : 1 : , "cheat" : The HDR tonemap scale. 1 = Use autoexposure, 0 = eyes fully closed, 16 = eyes wide open. mat_hdr_uncapexposure : 0 : , "cheat", "cl" : mat_hsv : 0 : , "cheat", "cl" : mat_info : cmd : : Shows material system info mat_leafvis : 0 : , "cheat" : Draw wireframe of current leaf mat_levelflush : 1 : : mat_lightmap_pfms : 0 : : Outputs .pfm files containing lightmap data for each lightmap page when a level exits. mat_loadtextures : 1 : , "cheat" : mat_luxels : 0 : , "cheat" : mat_max_worldmesh_vertices : 65536 : : mat_maxframelatency : 1 : : mat_measurefillrate : 0 : , "cheat" : mat_mipmaptextures : 1 : : mat_monitorgamma : 2 : : monitor gamma (typically 2.2 for CRT and 1.7 for LCD) mat_monitorgamma_tv_enabled : 0 : , "a" : mat_monitorgamma_tv_exp : 2 : : mat_monitorgamma_tv_range_max : 255 : : mat_monitorgamma_tv_range_min : 16 : : mat_morphstats : 0 : , "cheat" : mat_motion_blur_enabled : 1 : : mat_motion_blur_falling_intensity : 1 : , "cl" : mat_motion_blur_falling_max : 20 : , "cl" : mat_motion_blur_falling_min : 10 : , "cl" : mat_motion_blur_forward_enabled : 0 : , "cl" : mat_motion_blur_percent_of_screen_max : 4 : : mat_motion_blur_rotation_intensity : 1 : , "cl" : mat_motion_blur_strength : 1 : , "cl" : mat_non_hdr_bloom_scalefactor : 0 : , "cl" : mat_norendering : 0 : , "cheat" : mat_normalmaps : 0 : , "cheat" : mat_normals : 0 : , "cheat" : mat_parallaxmap : 0 : : mat_picmip : 2 : : mat_postprocess_x : 4 : , "cl" : mat_postprocess_y : 1 : , "cl" : mat_postprocessing_combine : 1 : , "cl" : Combine bloom, software anti-aliasing and color correction into one post-processing pass mat_proxy : 0 : , "cheat" : mat_queue_mode : -1 : : The queue/thread mode the material system should use: -1=default, 0=synchronous single thread, 1=queued single thread, 2=queued mat_reducefillrate : 1 : : mat_reloadallmaterials : cmd : : Reloads all materials mat_reloadmaterial : cmd : : Reloads a single material mat_reloadtextures : cmd : : Reloads all textures mat_report_queue_status : 0 : : mat_reporthwmorphmemory : cmd : : Reports the amount of size in bytes taken up by hardware morph textures. mat_reversedepth : 0 : , "cheat" : mat_savechanges : cmd : : saves current video configuration to the registry mat_setvideomode : cmd : : sets the width, height, windowed state of the material system mat_shadowstate : 1 : : mat_show_ab_hdr : 0 : : mat_show_ab_hdr_hudelement : 0 : , "cl" : HDR Demo HUD Element toggle. mat_show_histogram : 0 : , "cl" : mat_show_texture_memory_usage : 0 : , "cheat", "numeric" : Display the texture memory usage on the HUD. mat_showcamerarendertarget : 0 : , "cheat", "cl" : mat_showenvmapmask : 0 : : mat_showframebuffertexture : 0 : , "cheat", "cl" : mat_showlightmappage : -1 : , "cl" : mat_showlowresimage : 0 : : mat_showmaterials : cmd : : Show materials. mat_showmaterialsverbose : cmd : : Show materials (verbose version). mat_showmiplevels : 0 : : color-code miplevels 2: normalmaps, 1: everything else mat_showtextures : cmd : : Show used textures. mat_showwatertextures : 0 : , "cheat", "cl" : mat_slopescaledepthbias_decal : 0 : , "cheat" : mat_slopescaledepthbias_normal : 0 : , "cheat" : mat_slopescaledepthbias_shadowmap : 16 : , "cheat" : mat_software_aa_blur_one_pixel_lines : 0 : , "a", "cl" : How much software AA should blur one-pixel thick lines: (0.0 - none), (1.0 - lots) mat_software_aa_debug : 0 : , "cl" : Software AA debug mode: (0 - off), (1 - show number of 'unlike' samples: 0->black, 1->red, 2->green, 3->blue), (2 - show anti-a mat_software_aa_edge_threshold : 1 : , "a", "cl" : Software AA - adjusts the sensitivity of the software AA shader's edge detection (default 1.0 - a lower value will soften more mat_software_aa_quality : 0 : , "a", "cl" : Software AA quality mode: (0 - 5-tap filter), (1 - 9-tap filter) mat_software_aa_strength : 0 : , "a", "cl" : Software AA - perform a software anti-aliasing post-process (an alternative/supplement to MSAA). This value sets the strength o mat_software_aa_strength_vgui : 1 : , "a", "cl" : Same as mat_software_aa_strength, but forced to this value when called by the post vgui AA pass. mat_software_aa_tap_offset : 1 : , "a", "cl" : Software AA - adjusts the displacement of the taps used by the software AA shader (default 1.0 - a lower value will make the im mat_softwarelighting : 0 : : mat_softwareskin : 0 : , "cheat" : mat_specular : 1 : : Enable/Disable specularity for perf testing. Will cause a material reload upon change. mat_spewvertexandpixelshaders : cmd : : Print all vertex and pixel shaders currently loaded to the console mat_stub : 0 : , "cheat", "cl" : mat_supportflashlight : 0 : : 0 - do not support flashlight (don't load flashlight shader combos), 1 - flashlight is supported mat_suppress : cmd : : Supress a material from drawing mat_surfaceid : 0 : , "cheat" : mat_surfacemat : 0 : , "cheat" : mat_texture_limit : -1 : , "numeric" : If this value is not -1, the material system will limit the amount of texture memory it uses in a frame. Useful for identifying mat_texture_list : 0 : : For debugging, show a list of used textures per frame mat_texture_list_all : 0 : , "numeric" : If this is nonzero, then the texture list panel will show all currently-loaded textures. mat_texture_list_txlod : cmd : : Adjust LOD of the last viewed texture +1 to inc resolution, -1 to dec resolution mat_texture_list_txlod_sync : cmd : : 'reset' - resets all run-time changes to LOD overrides, 'save' - saves all changes to material content files mat_texture_list_view : 1 : , "numeric" : If this is nonzero, then the texture list panel will render thumbnails of currently-loaded textures. mat_tonemap_algorithm : 1 : , "cheat" : 0 = Original Algorithm 1 = New Algorithm mat_tonemap_min_avglum : 3 : , "cheat", "cl" : mat_tonemap_percent_bright_pixels : 2 : , "cheat", "cl" : mat_tonemap_percent_target : 60 : , "cheat", "cl" : mat_tonemapping_occlusion_use_stencil : 1 : , "cl" : mat_trilinear : 0 : : mat_use_compressed_hdr_textures : 1 : : mat_viewportscale : 1 : , "cheat", "cl" : Scale down the main viewport (to reduce GPU impact on CPU profiling) mat_vsync : 0 : : Force sync to vertical retrace mat_wateroverlaysize : 128 : , "cl" : mat_wireframe : 0 : , "cheat" : mat_yuv : 0 : , "cheat", "cl" : matchmakingport : 27025 : : Host Matchmaking port maxplayers : cmd : : Change the maximum number of players allowed on this server. mem_compact : cmd : : mem_dump : cmd : : Dump memory stats to text file. mem_dumpstats : 0 : : Dump current and max heap usage info to console at end of frame ( set to 2 for continuous output ) mem_dumpvballocs : cmd : : Dump VB memory allocation stats. mem_eat : cmd : : mem_force_flush : 0 : : Force cache flush of unlocked resources on every alloc mem_max_heapsize : 256 : : Maximum amount of memory to dedicate to engine hunk and datacache (in mb) mem_max_heapsize_dedicated : 64 : : Maximum amount of memory to dedicate to engine hunk and datacache, for dedicated server (in mb) mem_min_heapsize : 144 : : Minimum amount of memory to dedicate to engine hunk and datacache (in mb) mem_periodicdumps : 0 : : Write periodic memstats dumps every n seconds. mem_test : cmd : : mem_test_each_frame : 0 : : Run heap check at end of every frame mem_test_every_n_seconds : 0 : : Run heap check at a specified interval mem_vcollide : cmd : : Dumps the memory used by vcollides memory : cmd : : Print memory stats. menuselect : cmd : : menuselect minisave : cmd : : Saves game (for current level only!) mm_add_item : cmd : : Add a stats item mm_add_player : cmd : : Add a player mm_max_spectators : 4 : : Max players allowed on the spectator team mm_message : cmd : : Send a message to all remote clients mm_minplayers : 2 : : Number of players required to start an unranked game mm_select_session : cmd : : Select a session mm_session_info : cmd : : Dump session information mm_stats : cmd : : mod_forcedata : 1 : : Forces all model file data into cache on model load. mod_forcetouchdata : 1 : : Forces all model file data into cache on model load. mod_load_anims_async : 0 : : mod_load_fakestall : 0 : : Forces all ANI file loading to stall for specified ms mod_load_mesh_async : 0 : : mod_load_showstall : 0 : : 1 - show hitches , 2 - show stalls mod_load_vcollide_async : 0 : : mod_lock_mdls_on_load : 0 : : mod_test_mesh_not_available : 0 : : mod_test_not_available : 0 : : mod_test_verts_not_available : 0 : : mod_touchalldata : 1 : : Touch model data during level startup mod_trace_load : 0 : : motdfile : 0 : , "sv" : The MOTD file to load. movie_fixwave : cmd : : Fixup corrupted .wav file if engine crashed during startmovie/endmovie, etc. mp_allowNPCs : 1 : , "sv", "nf" : mp_allowspectators : 1 : , "sv", "rep" : toggles whether the server allows spectator mode or not mp_autocrosshair : 1 : , "sv", "nf" : mp_autoteambalance : 1 : , "sv", "nf" : mp_autoteambalance_delay : 15 : , "sv", "nf" : Time after the teams become unbalanced to attempt to switch players. mp_autoteambalance_warning_delay : 5 : , "sv", "nf" : Time after the teams become unbalanced to print a balance warning. mp_bonusroundtime : 15 : , "sv", "rep" : Time after round win until round restarts mp_chattime : 10 : , "sv", "rep" : amount of time players can chat after the game is over mp_clan_ready_signal : 0 : , "sv" : Text that team leader from each team must speak for the match to begin mp_clan_readyrestart : 0 : , "sv" : If non-zero, game will restart once someone from each team gives the ready signal mp_closepanels : cmd : : Closes all open Viewport menus mp_decals : 200 : , "a" : mp_defaultteam : 0 : , "sv" : mp_disable_autokick : cmd : : Prevents a userid from being auto-kicked mp_enableroundwaittime : 1 : , "sv", "rep" : Enable timers to wait between rounds. mp_fadetoblack : 0 : , "sv", "rep" : fade a player's screen to black when he dies mp_falldamage : 0 : , "sv", "nf" : mp_flashlight : 0 : , "sv", "nf" : mp_footsteps : 1 : , "sv", "nf" : mp_forcecamera : 1 : , "sv", "rep" : Restricts spectator modes for dead players mp_forcerespawn : 1 : , "sv", "nf" : mp_forcerespawnplayers : cmd : : Force all players to respawn. mp_forcewin : cmd : : Forces team to win mp_fraglimit : 0 : , "sv", "nf" : mp_friendlyfire : 0 : , "sv", "nf", "rep" : mp_idledealmethod : 1 : , "sv" : Deals with Idle Players. 1 = Sends them into Spectator mode then kicks them if they're still idle, 2 = Kicks them out of the ga mp_idlemaxtime : 3 : , "sv" : Maximum time a player is allowed to be idle (in minutes) mp_maxrounds : 0 : , "sv", "nf", "rep" : max number of rounds to play before server changes maps mp_restartgame : 0 : , "sv" : If non-zero, game will restart in the specified number of seconds mp_restartround : 0 : , "sv" : If non-zero, the current round will restart in the specified number of seconds mp_scrambleteams : cmd : : Scramble the teams and restart the game mp_showrespawntimes : cmd : : Show the min respawn times for the teams mp_simulatemultiplecappers : 1 : , "sv", "cheat" : mp_stalemate_timelimit : 240 : , "sv", "rep" : Timelimit (in seconds) of the stalemate round. mp_switchteams : cmd : : Switch teams and restart the game mp_teamlist : 0 : , "sv", "nf" : mp_teamoverride : 1 : , "sv" : mp_teamplay : 0 : , "sv", "nf" : mp_teams_unbalance_limit : 1 : , "sv", "nf", "rep" : Teams are unbalanced when one team has this many more players than the other team. (0 disables check) mp_teststalemate : cmd : : Test the stalemate mode. Parameter: <0/1>. If 1, the map will reset at the end. mp_time_between_capscoring : 30 : , "sv" : Delay between scoring of owned capture points. mp_timelimit : 0 : , "sv", "nf", "rep" : game time per map in minutes mp_usehwmmodels : 0 : , "cl" : Enable the use of the hw morph models. (-1 = never, 1 = always, 0 = based upon GPU) mp_usehwmvcds : 0 : , "cl" : Enable the use of the hw morph vcd(s). (-1 = never, 1 = always, 0 = based upon GPU) mp_waitingforplayers_cancel : 0 : , "sv" : Set to 1 to end the WaitingForPlayers period. mp_waitingforplayers_restart : 0 : , "sv" : Set to 1 to start or restart the WaitingForPlayers period. mp_weaponstay : 0 : , "sv", "nf" : mp_winlimit : 0 : , "sv", "rep" : Max number of rounds one team can win before server changes maps multvar : cmd : : Multiply specified convar value. muzzleflash_light : 1 : , "a", "cl" : name : 0 : , "a", "user", "print", "server_can_execute" : Current user name nav_analyze : cmd : : Re-analyze the current Navigation Mesh and save it to disk. nav_area_bgcolor : 0 : , "sv" : RGBA color to draw as the background color for nav areas while editing. nav_avoid : cmd : : Toggles the 'avoid this area when possible' flag used by the AI system. nav_begin_area : cmd : : Defines a corner of a new Area or Ladder. To complete the Area or Ladder, drag the opposite corner to the desired location and nav_build_ladder : cmd : : Attempts to build a nav ladder on the climbable surface under the cursor. nav_check_file_consistency : cmd : : Scans the maps directory and reports any missing/out-of-date navigation files. nav_check_floor : cmd : : Updates the blocked/unblocked status for every nav area. nav_clear_walkable_marks : cmd : : Erase any previously placed walkable positions. nav_compress_id : cmd : : Re-orders area and ladder ID's so they are continuous. nav_connect : cmd : : To connect two Areas, mark the first Area, highlight the second Area, then invoke the connect command. Note that this creates a nav_coplanar_slope_limit : 0 : , "sv" : nav_corner_adjust_adjacent : 18 : , "sv" : radius used to raise/lower corners in nearby areas when raising/lowering corners. nav_corner_lower : cmd : : Lower the selected corner of the currently marked Area. nav_corner_place_on_ground : cmd : : Places the selected corner of the currently marked Area on the ground. nav_corner_raise : cmd : : Raise the selected corner of the currently marked Area. nav_corner_select : cmd : : Select a corner of the currently marked Area. Use multiple times to access all four corners. nav_create_place_on_ground : 0 : , "sv" : If true, nav areas will be placed flush with the ground when created by hand. nav_crouch : cmd : : Toggles the 'must crouch in this area' flag used by the AI system. nav_delete : cmd : : Deletes the currently highlighted Area. nav_delete_marked : cmd : : Deletes the currently marked Area (if any). nav_disconnect : cmd : : To disconnect two Areas, mark an Area, highlight a second Area, then invoke the disconnect command. This will remove all connec nav_dont_hide : cmd : : Toggles the 'area is not suitable for hiding spots' flag used by the AI system. nav_edit : 0 : , "sv", "cheat" : Set to one to interactively edit the Navigation Mesh. Set to zero to leave edit mode. nav_end_area : cmd : : Defines the second corner of a new Area or Ladder and creates it. nav_generate : cmd : : Generate a Navigation Mesh for the current map and save it to disk. nav_generate_incremental : cmd : : Generate a Navigation Mesh for the current map and save it to disk. nav_jump : cmd : : Toggles the 'traverse this area by jumping' flag used by the AI system. nav_ladder_flip : cmd : : Flips the selected ladder's direction. nav_load : cmd : : Loads the Navigation Mesh for the current map. nav_make_sniper_spots : cmd : : Chops the marked area into disconnected sub-areas suitable for sniper spots. nav_mark : cmd : : Marks the Area or Ladder under the cursor for manipulation by subsequent editing commands. nav_mark_unnamed : cmd : : Mark an Area with no Place name. Useful for finding stray areas missed when Place Painting. nav_mark_walkable : cmd : : Mark the current location as a walkable position. These positions are used as seed locations when sampling the map to generate nav_merge : cmd : : To merge two Areas into one, mark the first Area, highlight the second by pointing your cursor at it, and invoke the merge comm nav_no_hostages : cmd : : Toggles the 'hostages cannot use this area' flag used by the AI system. nav_no_jump : cmd : : Toggles the 'dont jump in this area' flag used by the AI system. nav_place_floodfill : cmd : : Sets the Place of the Area under the cursor to the curent Place, and 'flood-fills' the Place to all adjacent Areas. Flood-filli nav_place_list : cmd : : Lists all place names used in the map. nav_place_pick : cmd : : Sets the current Place to the Place of the Area under the cursor. nav_place_replace : cmd : : Replaces all instances of the first place with the second place. nav_precise : cmd : : Toggles the 'dont avoid obstacles' flag used by the AI system. nav_quicksave : 0 : , "sv", "cheat" : Set to one to skip the time consuming phases of the analysis. Useful for data collection and testing. nav_remove_unused_jump_areas : cmd : : Removes jump areas with at most 1 connection to a ladder or non-jump area. nav_restart_after_analysis : 1 : , "sv" : When nav nav_restart_after_analysis finishes, restart the server. Turning this off can cause crashes, but is useful for increm nav_run : cmd : : Toggles the 'traverse this area by running' flag used by the AI system. nav_save : cmd : : Saves the current Navigation Mesh to disk. nav_set_place_mode : cmd : : Sets the editor into or out of Place mode. Place mode allows labelling of Area with Place names. nav_show_approach_points : 0 : , "sv", "cheat" : Show Approach Points in the Navigation Mesh. nav_show_area_info : 0 : , "sv" : Duration in seconds to show nav area ID and attributes while editing nav_show_danger : 0 : , "sv", "cheat" : Show current 'danger' levels. nav_show_ladder_bounds : cmd : : Draws the bounding boxes of all func_ladders in the map. nav_show_nodes : 0 : , "sv" : nav_show_player_counts : 0 : , "sv", "cheat" : Show current player counts in each area. nav_slope_limit : 0 : , "sv" : The ground unit normal's Z component must be greater than this for nav areas to be generated. nav_snap_to_grid : 0 : , "sv" : Snap to the nav generation grid when creating new nav areas nav_splice : cmd : : To splice, mark an area, highlight a second area, then invoke the splice command to create a new, connected area between them. nav_split : cmd : : To split an Area into two, align the split line using your cursor and invoke the split command. nav_split_place_on_ground : 0 : , "sv" : If true, nav areas will be placed flush with the ground when split. nav_stand : cmd : : Toggles the 'stand while hiding' flag used by the AI system. nav_stop : cmd : : Toggles the 'must stop when entering this area' flag used by the AI system. nav_strip : cmd : : Strips all Hiding Spots, Approach Points, and Encounter Spots from the current Area. nav_toggle_place_mode : cmd : : Toggle the editor into and out of Place mode. Place mode allows labelling of Area with Place names. nav_toggle_place_painting : cmd : : Toggles Place Painting mode. When Place Painting, pointing at an Area will 'paint' it with the current Place. nav_transient : cmd : : Toggles the 'area is transient and may become blocked' flag used by the AI system. nav_unmark : cmd : : Clears the marked Area or Ladder. nav_update_blocked : cmd : : Updates the blocked/unblocked status for every nav area. nav_use_place : cmd : : If used without arguments, all available Places will be listed. If a Place argument is given, the current Place is set. nav_walk : cmd : : Toggles the 'traverse this area by walking' flag used by the AI system. nav_warp_to_mark : cmd : : Warps the player to the marked area. net_blockmsg : 0 : , "cheat" : Discards incoming message: <0|1|name> net_channels : cmd : : Shows net channel info net_chokeloop : 0 : : Apply bandwidth choke to loopback packets net_compresspackets : 1 : : Use lz compression on game packets. net_compresspackets_minsize : 128 : : Don't bother compressing packets below this size. net_compresssplits : 1 : : Compress splitpacket parts before sending net_compressvoice : 0 : : Attempt to compress out of band voice payloads (360 only). net_drawslider : 0 : : Draw completion slider during signon net_droppackets : 0 : , "cheat" : Drops next n packets on client net_fakelag : 0 : , "cheat" : Lag all incoming network data (including loopback) by this many milliseconds. net_fakeloss : 0 : , "cheat" : Simulate packet loss as a percentage (negative means drop 1/n packets) net_graph : 0 : , "a", "cl" : Draw the network usage graph, = 2 draws data on payload, = 3 draws payload legend. net_graphheight : 64 : , "cl" : net_graphpos : 1 : , "a", "cl" : net_graphsolid : 1 : , "a", "cl" : net_maxfilesize : 16 : : Maximum allowed file size for uploading in MB net_maxfragments : 1280 : : Max fragment bytes per packet net_queue_flush_interval : 1 : : How many milliseconds in between sending queued packets. net_queue_trace : 0 : : net_queued_packet_thread : 1 : : Use a high priority thread to send queued packets out instead of sending them each frame. net_reduce_payloadsize : 0 : , "rep" : Set to true to clamp network bandwidth to Xbox 360 limits net_scale : 5 : , "a", "cl" : net_showdrop : 0 : : Show dropped packets in console net_showevents : 0 : : Dump game events to console (1=client only, 2=all). net_showfragments : 0 : : Show netchannel fragments net_showmsg : 0 : : Show incoming message: <0|1|name> net_showpeaks : 0 : : Show messages for large packets only: net_showsplits : 0 : : Show info about packet splits net_showtcp : 0 : : Dump TCP stream summary to console net_showudp : 0 : : Dump UPD packets summary to console net_start : cmd : : Inits multiplayer network sockets net_status : cmd : : Shows current network status next : 0 : , "cheat" : Set to 1 to advance to next frame ( when singlestep == 1 ) nextdemo : cmd : : Play next demo in sequence. noclip : cmd : : Toggle. Player becomes non-solid and flies. notarget : cmd : : Toggle. Player becomes hidden to NPCs. npc_ally_deathmessage : 1 : , "sv", "cheat" : npc_ammo_deplete : cmd : : Subtracts half of the target's ammo npc_bipass : cmd : : Displays the local movement attempts by the given NPC(s) (triangulation detours). Failed bypass routes are displayed in red, s npc_combat : cmd : : Displays text debugging information about the squad and enemy of the selected NPC (See Overlay Text) Arguments: {npc_name} npc_conditions : cmd : : Displays all the current AI conditions that an NPC has in the overlay text. Arguments: {npc_name} / {npc class_name} / no a npc_create : cmd : : Creates an NPC of the given type where the player is looking (if the given NPC can actually stand at that location). Note that npc_create_aimed : cmd : : Creates an NPC aimed away from the player of the given type where the player is looking (if the given NPC can actually stand at npc_create_equipment : 0 : , "sv" : npc_destroy : cmd : : Removes the given NPC(s) from the universe Arguments: {npc_name} / {npc_class_name} / no argument picks what player is looki npc_destroy_unselected : cmd : : Removes all NPCs from the universe that aren't currently selected npc_enemies : cmd : : Shows memory of NPC. Draws an X on top of each memory. Eluded entities drawn in blue (don't know where it went) Unreachable npc_focus : cmd : : Displays red line to NPC's enemy (if has one) and blue line to NPC's target entity (if has one) Arguments: {npc_name} / {np npc_freeze : cmd : : Selected NPC(s) will freeze in place (or unfreeze). If there are no selected NPCs, uses the NPC under the crosshair. Arguments npc_freeze_unselected : cmd : : Freeze all NPCs not selected npc_go : cmd : : Selected NPC(s) will go to the location that the player is looking (shown with a purple box) Arguments: -none- npc_go_do_run : 1 : , "sv" : Set whether should run on NPC go npc_go_random : cmd : : Sends all selected NPC(s) to a random node. Arguments: -none- npc_heal : cmd : : Heals the target back to full health npc_height_adjust : 1 : , "a", "sv" : Enable test mode for ik height adjustment npc_kill : cmd : : Kills the given NPC(s) Arguments: {npc_name} / {npc_class_name} / no argument picks what player is looking at npc_nearest : cmd : : Draw's a while box around the NPC(s) nearest node Arguments: {entity_name} / {class_name} / no argument picks what player i npc_relationships : cmd : : Displays the relationships between this NPC and all others. Arguments: {entity_name} / {class_name} / no argument picks wha npc_reset : cmd : : Reloads schedules for all NPC's from their script files Arguments: -none- npc_route : cmd : : Displays the current route of the given NPC as a line on the screen. Waypoints along the route are drawn as small cyan rectang npc_select : cmd : : Select or deselects the given NPC(s) for later manipulation. Selected NPC's are shown surrounded by a red translucent box Arg npc_sentences : 0 : , "sv" : npc_speakall : cmd : : Force the npc to try and speak all their responses npc_squads : cmd : : Obsolete. Replaced by npc_combat npc_steering : cmd : : Displays the steering obstructions of the NPC (used to perform local avoidance) Arguments: {entity_name} / {class_name} / n npc_steering_all : cmd : : Displays the steering obstructions of all NPCs (used to perform local avoidance) npc_task_text : cmd : : Outputs text debugging information to the console about the all the tasks + break conditions of the selected NPC current schedu npc_tasks : cmd : : Displays detailed text debugging information about the all the tasks of the selected NPC current schedule (See Overlay Text) A npc_teleport : cmd : : Selected NPC will teleport to the location that the player is looking (shown with a purple box) Arguments: -none- npc_thinknow : cmd : : Trigger NPC to think npc_viewcone : cmd : : Displays the viewcone of the NPC (where they are currently looking and what the extents of there vision is) Arguments: {ent npc_vphysics : 0 : , "sv" : obj_capture_damage : 0 : , "sv" : Captures all damage taken by objects for dumping later. obj_dispenser_heal_rate : 5 : , "sv", "cheat" : obj_dump_damage : cmd : : obj_sapper_amount : 25 : , "sv" : Amount of health inflicted by a Sapper object per second obj_sapper_health : 100 : , "sv" : Sapper health obj_show_damage : 0 : , "sv" : Show all damage taken by objects. object_deterioration_time : 30 : , "sv" : Time it takes for a fully-healed object to deteriorate. old_radiusdamage : 0 : , "sv", "rep" : old_vl : 0 : : opt_EnumerateLeavesFastAlgorithm : 1 : : Use the new SIMD version of CEngineBSPTree::EnumerateLeavesInBox. option_duck_method : 1 : , "a", "sv", "rep" : option_duck_method_default : 1 : , "cl" : overview_alpha : 1 : , "a", "clientcmd_can_execute", "cl" : Overview map translucency. overview_health : 1 : , "a", "clientcmd_can_execute", "cl" : Show player's health in map overview. overview_locked : 1 : , "a", "clientcmd_can_execute", "cl" : Locks map angle, doesn't follow view angle. overview_mode : cmd : : Sets overview map mode off,small,large: <0|1|2> overview_names : 1 : , "a", "clientcmd_can_execute", "cl" : Show player's names in map overview. overview_tracks : 1 : , "a", "clientcmd_can_execute", "cl" : Show player's tracks in map overview. overview_zoom : cmd : : Sets overview map zoom: [